Descargar Imprimir esta página

Herschel XLS Instrucciones De Instalación Y Operación página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66
Press the Holiday button again to save and exit. The days number will count down
daily until your entered number of days has elapsed. The unit will return to a target
temperature of 18˚C at the end of the countdown period.
To quit an active holiday mode, press the "PRG" button and select Manual or
program modes.
Open Window Function
If the T-MT detects a temperature drop of more than 3°C within 15 minutes, the
controller will power-off the heater. "OF" will appear on the screen and the text
"Alarm! Open Window!" will be displayed. Pressing the Power button on the unit will
resume normal operation, or waiting for 30 minutes will also restore normal
operation.
Open Window detection will only work if the feature is activated and shown as an
Open Window icon on the display (see display schematic on page 2). To activate the
Open Window function, press "SET" and '+' together for 3 seconds. To deactivate the
Open Window function, repeat the process.
Adaptive Start
Adaptive start is an intelligent energy-saving feature which will turn on the heating in
advance of the next scheduled time if the current temperature is more than 5°C
below the next target temperature. (This avoids wasteful loads on the heater).
Adaptive Start will only work if the feature is activated and shown as a Timer icon on
the display (see display schematic on page 2). To activate the Adaptive Start feature,
press "SET" and '-' together for 3 seconds. To deactivate, repeat the process.
Keypad Lock
To activate the keypad lock, press SET and Holiday Mode buttons together for 3
seconds. A shut padlock icon will appear on the screen. Press SET and Holiday Mode
buttons together again for another 3 seconds to deactivate the keypad lock.
Energy monitoring
The T-MT can monitor the energy consumption of the heaters paired with it. To set
up energy monitoring:
Power off the thermostat
Press and hold the "+" button until the "SET" digits flash on the screen.
Adjust the number to match the total power (in kW) that this thermostat
connects to. (e.g. if more than one heater, add their power together). Click "Off"
again to store the figure.
T-MT Mains powered
wifi thermostat

Publicidad

loading