Publicidad
Idiomas disponibles
Idiomas disponibles
You can always check current consumption details by pressing the "-" and "+" button
together for 3 seconds. The display will show:
Using this feature with the SmartLife App gives you a more comprehensive record of
the energy use over time and you can also integrate with other SmartLife devices
using the "Smart" feature in the App.
Factory Settings
To restore to factory settings, power off the thermostat, press and hold the "Holiday"
button for 5 seconds until the screen starts to flash.
Calibration
Calibration is a process to alter the temperature of the T-MT up or down in order to
align the unit with another thermostat. The T-MT can be calibrated 5°C up or down
from the default of 0 (no calibration).
Calibrating UP (i.e. +1 °C etc) means the T-MT will display a higher temperature than
the present one being shown. Use this when you think the T-MT is under-reading
compared with another thermostat.
Calibrating DOWN (i.e. - 1 °C etc) means the T-MT will display a lower temperature
than the present one being shown. Use this when you think the T-MT is over-reading
compared with another thermostat.
When adjusting the T-MT Time & Temperature settings using the SET button,
calibration is the final setting you can change. The default is 0. Use + or – keys to
adjust this figure up or down.
You can also change calibration using the Smartlife App.
T-MT Mains powered
wifi thermostat
1.
Heating
today
2.
Energy
consumption
yesterday (in kW)
3.
Energy
consumption today
(in kW).
hours
Publicidad
