Publicidad
Idiomas disponibles
Idiomas disponibles
What you need
Screwdrivers
Installation
1. Turn OFF the power at the
circuit breaker and confirm
with the voltage tester at the
switch before proceeding.
Place voltage tester against the
existing switch checking the
wall plate, screws and switch
at various points to determine
that there is no power present.
2. Remove the wall plate and pull
out the existing light switch
so that all wires are exposed
outside of the electrical box (do
not disconnect wires).
3. Label the live wire with a piece
of electrical tape.
Different color screw
(Black or Copper)
electrical tape
Pliers
Piece of
Wire Stripper
Voltage Tester
4
5
S
3
6
Publicidad
