Publicidad
Idiomas disponibles
Idiomas disponibles
Installing and pairing smart switch
The smart switch is connected through the app and will only operate on your home's
2.4GHz Wi-Fi network. Most new routers are dual-bandwidth (both 2.4GHz and
5GHz), ensure you select the 2.4GHz network which covers a wider range than the
5GHz. To make sure your phone is on the 2.4GHz network, either select it in the list of
available networks on your phone or go into the router settings and temporarily de-
activate the 5GHz network (you can activate it again after pairing is done).
If this is not possible and the smart switch is not found, try putting the smart switch in
pairing mode by holding the ON/OFF button for 5 seconds (or until the indicator lights
flashes red), then walking a short distance away from the router. Due to the short
range of 5GHz networks, your phone should auto-connect to the 2.4GHz at this point.
Once connected, you can start pairing in the app. You can pair as many devices as you
want at the same time.
Name your own or select
from the list of standard
rooms
For additional support, visit www.liteline.com/WiZsupport
Press the 'Add a device'
button and enter your
Wi-Fi password
Select the 'Wi-Fi Switch'
and continue with prompts
to connect your device
Publicidad
