Sauder worksense Mason Peak Serie Instrucciones De Montaje página 28

Step 22
1
D14
Groove
å
Insert the DRAWER SIDES (D14 and D15) at an angle
into the slot at each end of the DRAWER FRONT (M).
3
1
M67
Surface with
HIDDEN CAM
å
Fasten the DRAWER BRACE (M67) to the DRAWER
FRONT (M). Tighten one HIDDEN CAM.
Page 28
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
M
D15
Hidden part using
recycled material.
Color may vary.
M
2
D14
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D985) into the
grooves in the DRAWER SIDES (D14 and D15) and
DRAWER FRONT (M).
4
D14
M67
å
Fasten the DRAWER BACK (D552) to the DRAWER
SIDES (D14 and D15) and DRAWER BRACE (M67). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
427836
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n fi
n i s h
s u r
e d
f a c
e
D985
M
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
D552
D15
www.sauder.com/officeservice
9
D15
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.