Sauder worksense Mason Peak Serie Instrucciones De Montaje página 30

Step 24
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D14 and D15).
å
Fasten the EXTENSION SLIDES (35MC) to the DRAWER SIDES (D14 and D15).
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in
the SLIDE.
å
Fasten two PULLS (191K) to the DRAWER FRONT (M). Use four BLACK 7/8"
MACHINE SCREWS (37S).
Open end
1
2
3
37S
BLACK 7/8" MACHINE SCREW
(4 used for the PULLS)
Page 30
10A
D15
191K
M
191K
Drawer Slide
Center the screw in the oval hole.
427836
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D14
2
3
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
www.sauder.com/officeservice
7
Open end
1
3S