Steelcase Migration SE Guía Rápida página 20

4 Operating and adjusting
PLEASE NOTE
Risk of damage to control panel!
Height adjustment – Memory control panel
EN
Manual reset of desktop
Wait for 5 seconds if the desk has just been connected to the
mains.
Configuring memory positions
20
}
Do not lean on the control panel
}
Do not place any objects on the control panel.
}
Do not pour liquids over the control panel.
1. Press the appropriate "Up or Down" button to
reach the desired desk height.
=
The desktop moves up or down.
2. Release the "Up or Down" button.
ü The desktop stops at the desired point. The display
indicates the desk height.
1. Press and hold the "Down" button.
=
The lower end position is reached.
2. Continue to press and hold the "Down" button for at
least 3 seconds.
=
The resetting and initialisation process is starting.
3. After conclusion of the resetting and initialisation
process, press the "Up" button.
ü The desired height is reached.
1. Press the "Up" or "Down" button until the desired
.