Publicidad
Idiomas disponibles
Idiomas disponibles
CHECKING THE WATER INLET HOSE
Check the water inlet hose at least once a
year. If there are any cracks, it should be
replaced immediately, during the wash cycle,
water pressure is very strong and a cracked
water inlet hose could easily spilt open.
• Never use second-hand water inlet
hose.
CLEANING THE DETERGENT DISPENSER
If there is a buildup of residual detergent or
additives, or if the softener compartment is not
rinsed out well enough, it may be helpful to
clean the dispenser.
1. Open the detergent dispenser tray fully.
Press down on the drawer catch (1) and
pull the the tray (2) from the appliance
housing.
2. Remove the liquid detergent cover (3) by
grasping it and pulling it upwards from the
detergent dispenser tray.
3. Clean the liquid detergent cover and the
detergent dispenser tray by holding it under
runing water. Lightly wipe away any
remaining detergent residue.
4. Attach the liquid detergent cover and slide
the detergent dispenser tray back in place
and close the tray securely.
Tip: Do not operate the appliance without the
detergent dispenser tray in place. Always keep
the tray completely closed.
CLEANING THE MESH FILTER IN THE
WATER INLET HOSE AND THE WATER
INLET VALVE
1. Close water tap and unscrew the water
inlet hose.
2. Clean the mesh filter at the hose's end
carefully with a fine brush.
3. Now unscrew the water inlet hose on the
back of the appliance by hand. Pull out the
mesh filter from the water inlet valve on the
back of the appliance with pliers and
carefully clean it.
4. Insert the mesh filter again. Connect the
water inlet hose to the water tap and the
appliance again. Do not use a tool to
connect the inlet hose. Open the water tap
and check that all connections are tight.
114
Publicidad
