GENERAL SPECIFICATIONS
Engine: A new generation energy saving and most fuel
efficient engine is pivoted to the vehicle chassis through
the crankcase swinging arm on the clutch side.
The rear wheel (drive-wheel) is fitted on the outer side of
the drive shaft.
Lubrication: Of engine (piston, cylinder, crank shaft, main
bearings flywheel side) is effected by an automatic oil
mixer device (AOM).
Fuel supply: Gravity fed petrol and oil. Oil is mixed in
petrol with automatic oil mixer device. Carburettor
provided with a throttle slide. Air intake located under the
seat.
Ignition: By means of an electronic ignition device (CDI)
which feeds the current to a high voltage transformer (HT
coil) to generate the spark.
Starting: Push button for self start on right hand side of
handlebar below head light switch. Kick start pedal for
manual start located on the right hand side of scooter.
Cooling: Forced air provided by a centrifugal fan.
Clutch: A new heavy duty, multiplate oil bath type. The
unit is cable operated by a lever located on the left
hand side of the handlebar and is adjustable.
Gear box: Four speed forward drive with constant
mesh gears immersed in oil bath are operated by hand
on the left hand side of the handlebar which functions
in conjunction with the clutch control lever.
Integral Chassis: Pressed steel sheet. Monocoque
structure.
Wheels: Interchangeable and made out of pressed
steel rim with 89 x 254 mm (3.50 x 10) tyres.
Handlebar: Aluminium casting base with headlamp,
instrument panel and indicator lights. All transmission
cables are concealed therein.
Steering column and suspension: The steering
column is pivoted on the front wheel swinging hub.
Front and rear suspensions are provided with helical
spring and hydraulic dampers.
Security lock: On the steering column and operated
by a key.
Saddle: Dual saddle, tip up type with push button
control and key security lock.
52