Corghi 601 Manual De Uso página 41

WARNING
A good grounding connection is essential for correct operation of the machine. NEVER
connect the machine ground wire to a gas pipe, water pipe, telephone cable or other
unsuitable objects.
WARNING
Non-compliance with the instructions and danger warnings can cause serious injuries
to the operator or other persons.
Do not operate the machine until you have read and understood all the danger/warn-
ing/caution notices in this manual.
The correct use of this machine requires a qualified and authorised operator. This operator
must be able to understand the manufacturer's written instructions, be suitably trained
and be familiar with the safety procedures and regulations. Operators are forbidden
from using the machine under the influence of alcohol or drugs that could affect his/her
physical and mental capacity.
The following conditions are essential under any circumstances:
- read and understand the information and instructions described in this manual;
- have a thorough knowledge of the features and characteristics of the machine;
- keep unauthorised persons well clear of the working area;
- make sure that the machine has been installed in compliance with all relevant standards
and regulations in force;
- make sure that all machine operators are suitably trained, that they are capable of us-
ing the machine correctly and safely and that they are adequately supervised during
work;
- do not touch power lines or the inside of electric motors or other electrical equipment
before making sure that they have been powered off;
- read this booklet carefully and learn how to use the machine correctly and safely;
- always keep this operator's manual in a place where it can be readily consulted and do
not fail to refer to it.
WARNING
Do not remove or deface the DANGER, WARNING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If one or more decals have been detached or
damaged, replacements can be obtained from your nearest CORGHI dealer.
- Observe the unified industrial accident prevention regulations relating to high voltages
and rotating machinery whenever the machine is in use or being serviced.
- Any unauthorised changes or modifications made to the machine automatically release
the manufacturer from any liability in the case of damage or accidents resulting from
such changes or modifications. Specifically, tampering with or removal of the machine's
safety devices is a breach of the regulations relating to safety at work.
Operator's manual @ 601
SAFETY REGULATIONS
GB
41