Manual Start - Rain Bird EASY RAIN Manual De Instrucciones

NOTE: The cycle indicator marks the current Calendar and Cycle
setting; it does not operate the controller.
Select Run Time (in minutes)
E
This setting is the duration of watering in minutes. In the green
section of the label, you can choose a run time of 2, 5, 10, 15, 30,
60, or 90 minutes. Turn the programming dial to the desired run
time and leave it there.
NOTES: You must leave the programming dial set on a run time for
the controller to run an automatic watering program.
If the controller has not been programmed properly, the default
program will automatically irrigate. The default program will water
every day for the time indicated on the programming dial, starting
eight hours after battery installation. The default program will not
run if there is no run time selected.
Connect to Valve
F
1. Hand-screw the latching solenoid onto the valve.
2. Attach the Easy Rain to the solenoid.
Off Mode (Standby)
G
To stop all watering, turn the programming dial to OFF. To resume
automatic operation, turn the dial to the run time selected in step E.

Manual Start

H
To start a manual cycle, turn the programming dial to ON. Watering
starts 10 seconds after you set the dial. To resume automatic
operation, turn the dial back to the run time selected in step E.
4 Easy Rain™