Publicidad
Idiomas disponibles
Idiomas disponibles
Course
Charge
1Charge
0 to 60 min
2Clean/Dry/
Clean
Charge
10 min
•
It is not possible to change the course after the
"Clean/Dry/Charge" course has started.
Dry
3Dry/Charge
180 min
•
It is possible to change to the "Clean/Dry/
Charge" course even after the "Dry/Charge"
course has started.
* When the ambient temperature of the self‑cleaning recharger is
low (approx. 15 °C (59 °F) or lower), the time it takes to dry the
shaver increases.
•
The Clean or Dry function may stop under extreme low
temperatures (approx. 0 °C (3 °F) or lower). In such a case, the
CLEAN and DRY lamps will blink when the "Clean/Dry/Charge"
course is selected, or the DRY lamp will blink when the "Dry/
Charge" course is selected.
10
Timerequired(guide)
Dry
Charge
80 min
0 to 60 min
(170 min*)
Charge
0 to 60 min
Followthestepsoutlinedbelowifthestatus
lampblinksorglows
Blinks
Correctly set the
detergent cartridge and
then restart a course.
Ifthestatuslampgoes
out
Continue a course.
Whenanabnormalityhas
beencorrected
Remove the AC adaptor
from a household outlet.
Whenthestatuslamp
goesout
Continue a course.
Glows
Remove the shaver from the self‑
cleaning recharger and then
check that the [CLEAN] lamp has
gone out. (Be careful as the blade
may be hot or wet.) Check that
the water tank is correctly
attached, the water tank cap is
securely closed and the self‑
cleaning recharger is placed
horizontally.
Whennoabnormalitywas
found
It is time to replace the
detergent cartridge and
cleaning liquid inside the water
tank. Wash away the old
cleaning liquid and then rinse
the water tank and then refill it
with water. Replace the old
detergent cartridge and then
restart the course.
Whenthestatuslampglows
again
Contact an authorized service
center.
Publicidad
