KYRA MEDICAL Comfort KYRA3000 Instrucciones De Uso página 9

INSTRUCTIONS FOR USE
3.6 Device Controls and Indicators:
Attach Rail Clamp at Patient
Hip Joint and Mount Stirrup.
Handles Should Mount
on the Outside. The Boot
Should Cradle the Upper
Calf.
Turning Lithotomy Handle
Unlocks and Controls the
Abduction, Adduction and
Lithotomy Controls of the
Stirrup.
3.7 Device Maintenance:
Make sure that all labels are installed and can be read. Replace labels as necessary by
using a plastic scraper to remove the label. Use an alcohol wipe to remove any adhe-
sive residue.
Contact Kyra Medical, Inc., if you need to repair or replace the device contact us using
the information from the contact details section.
3.8 Cleaning and Disinfection:
WARNING:
• After each use, clean the device as directed in this instruction for use.
• Do not submerge the device in liquid. Equipment damage can occur.
• Use caution in areas where liquid can get into the mechanism.
• Do not use bleach or products that contain bleach to clean the device. Injury or
equipment damage can occur.
• Make sure that the device is dry before you store it or use it again.
Wipes:
• Wipes may contain up to 2% sodium hypochlorite.
• Wipes may contain benzalkonium chloride (< or = 0.6% conc.) and didecyl dimethyl
ammonium chloride (up to 0.6% conc.)
©2023 Kyra Medical, Inc.
This Symbol Represent the Patient's Right foot
9
Loosen Control Handle
to Adjust Boot Flexion,
Extension, Abduction,
Adduction and Rotation.
Ensure Stirrup is Aligned
with Patient's Hip. Toe,
Knee and Opposing
Shoulder.
IFU 03-0125 REV K