Oase InScenio FM-Master Cloud Puesta En Marcha página 16

1 Weather protection hood
• The protective hood must always be in place during operation.
2 InScenio FM-Master Cloud
3 Fine-wire fuse, dimmer
4 Service pin, for operating the service button (13)
5 Status LED
6 Terminal resistor for the OASE Control-network (OC-network)
7 Ground stake
8 OC-OUT
• Connection for a OASE Control-capable unit or the terminal resistor (6).
• The connection must always be connected.
9 Antenna
10 Power supply connection
• The InScenio FM-Master Cloud is switched on, when it is connected to the power supply. It is
switched off when it is disconnected from the power supply.
• In the standard version, the InScenio FM-Master Cloud is connected via the coupling of a commer-
cially available extension cable. The extension cable with earthing contact must be suitable for
continuous use in outdoor areas. Get advice from a specialist dealer.
• For units for the United Kingdom Great Britain (UK), the InScenio FM-Master Cloud must be con-
nected by a certified electrician via a rear connection cable.
11 Socket, switchable
12 Socket, switchable and dimmable
13 Service switch, is actuated with service pin (4)
16