Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Warning or Caution
Always wear approved
eye protection
Do NOT use on
energized circuits
Read instructions
To ensure safe operations and service of the instruments, follow these
instructions. Failure to observe these warnings can result in re,
electric shock, severe injury or death.
The Digital Toner-Pro, test leads, and Digital Probe-Pro (sold separately), are
The Digital Toner-Pro, test leads, and Digital Probe-Pro (sold separately), are
The Digital Toner-Pro, test leads, and Digital Probe-Pro (sold separately), are
•
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
designed for use on extra-low voltage cabling systems (less than 60V) for testing
when
when
NOT
NOT
NOT
NOT energized.
NOT
NOT
energized.
energized.
energized.
The maximum voltage across ABN Test Clips of the Digital Toner-Pro is 60V in
The maximum voltage across ABN Test Clips of the Digital Toner-Pro is 60V in
The maximum voltage across ABN Test Clips of the Digital Toner-Pro is 60V in
•
Test mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to
Test mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to
Test mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to
Test mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to
live mains AC power may damage it and pose a safety hazard for the user.
live mains AC power may damage it and pose a safety hazard for the user.
DO NOT use instruments if they are wet, as it could pose a shock hazard.
DO NOT use instruments if they are wet, as it could pose a shock hazard.
DO NOT
•
DO NOT use instruments if they are damaged in any way.
DO NOT
DO NOT use instruments if they are damaged in any way.
•
Turn off instruments and disconnect all ABN Test Clips before attempting to
Turn off instruments and disconnect all ABN Test Clips before attempting to
Turn off instruments and disconnect all ABN Test Clips before attempting to
•
replace batteries.
replace batteries.
The battery door must be in place and secure before you operate the instrument.
•
DO NOT open the case, other than the battery compartment.
DO NOT open the case, other than the battery compartment.
DO NOT
•
4
SYMBOLS ON TONER
WARNINGS
Conformité Européenne:
Conforms with European
Economic Area directives
UKCA:
UK Conformity Assessment
WEEE:
Electronics disposal
Publicidad
