Publicidad
Idiomas disponibles
Idiomas disponibles
System connection (continued)
■ USB operation (6)
1.
Insert the USB storage drive into the USB slot on the
rear panel.
2.
Press the
button repeatedly on the remote control
to select USB mode.
3.
The sound bar will automatically start playing the MP3
tracks from the connected USB drive. If playback
does not start automatically, press the
4.
To skip to the previous/next track, press the
buttons on the remote control.
Notes:
●
MP3 format is supported.
●
Unsupported file formats are skipped. For example,
Word documents (.doc) or MP3 files with extension .dlf
are ignored and not played
●
Even when the files are in a supported format (MP3),
some may not play or display depending on the
compatibility.
●
In some case, reading may be as long as 60 seconds,
this is not a malfunction.
●
Depending on the amount of data and media speed,
it may take longer for the unit to read the USB device.
●
The maximum USB memory size is 32GB.
●
USB memory device must be formatted in FAT, FAT16
or FAT32
■ Subwoofer Connection (7)
Press STANDBY button on the remote control to power
on the sound bar.
Make sure the AC power cord for the subwoofer is
connected to a power supply securely.
The subwoofer can receive the wireless audio signal from
the sound bar when the indicator light flashing red on the
subwoofer.
The subwoofer is in searching wireless signal and enter
pair status with soundbar, the indicator light on the
subwoofer keeps solid blue means the sound bar and
subwoofer are connected.
Operations
■ Basic operations
Standby mode
Press the STANDBY button on the unit or the remote to
put the system into standby mode. To resume normal
operation, press this button again.
Note: This unit is designed to enter STANDBY mode
automatically, after about 15 minutes (approximately) of
inactivity. Press STANDBY button to wake the unit.
Note: When you power on the unit from standby, it will
resume in the mode that was last used.
Switching modes
To switch between the modes: Press the
on the unit or on the remote control to select LINE IN,
OPTICAL, HDMI ARC, USB mode, or BT (Bluetooth).
Manually connecting the subwoofer and sound bar:
When the subwoofer can not be connected to the sound
bar and the indicator light on the subwoofer will flash red,
press and hold
control, the sound bar will repair with the subwoofer, the
indicator light on the subwoofer keeps solid blue when the
subwoofer and sound bar were connected.
button.
Disconnecting the subwoofer and sound bar:
Press and hold
on the subwoofer to disconnect the connection subwoofer
and sound bar when the subwoofer and sound bar was
connected.
Adjust the Volume
Press the + / - buttons on the unit or press the VOL+ /
VOL- buttons on the remote control to adjust the volume.
If you wish to turn the sound off, press the MUTE button
on the remote control. Press the MUTE button again
or press the VOL+ / VOL- buttons on the unit or on the
remote control to resume normal listening.
Select Equalizer (EQ) Effect
While playing, press the MOVIE, MUSIC, or NEWS
button on the remote control to select the preset
equalizers: Movie (recommended for viewing movies),
Music (recommended for listening to music), NEWS
(recommended for listening to NEWS).
button
E-12
button on the sound bar or on the remote
button on the sound bar or PAIR button
7
Publicidad
