Descargar Imprimir esta página

Sharp HT-SBW192 Manual De Funcionamiento página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Precautions
■ General
● Keep your equipment at least 4" (10 cm) of free space
along the sides, top and back for proper ventilation.
● Use the unit on a firm, level surface free from vibration.
● Place the unit at least 12" (30 cm) away from any CRT
TV to avoid color variations across the TV screen. If
the variations persist, move the unit further away from
the TV. LCD TV is not prone to such variation.
● Keep the unit away from direct sunlight, strong
magnetic
fields,
excessive
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not expose the unit to moisture, to temperatures
higher than 113˚F (45˚C) or to extremely low
temperatures.
● If the unit does not work properly, unplug and plug it in
again. Then turn on the unit.
● In case of an electrical storm, unplug the unit for safety.
● Hold the AC power plug by the head when removing
it from the AC outlet, as pulling the cord can damage
internal wires.
● Do not place anything on top of the unit.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
● This unit should only be used within the range of 32˚F
- 113˚F (0˚C - 45˚C).
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such a
way that it does not require a safety connection to
electrical earth.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result in
a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
dust,
humidity
and
E-4
■ Volume Control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high
volumes.
■ Before use
● Choose unit installation location carefully. Avoid
placing it in direct sunlight or close to a source of
heat. Also avoid locations subject to vibrations and
excessive dust, cold or moisture. Keep away from
sources that hum, such as transformers or motors.
● Do not open the cabinet as this might result in damage
to the circuitry or electrical shock, if a foreign object
should get into the set, contact your dealer.
● When removing the power plug from the wall outlet,
always pull directly on the plug, never pull the cord.
● Do not attempt to clean the unit with chemical solvents
as this might damage the unit. Use a clean, dry cloth.
● In order to shut off the power to this product completely,
unplug the power cord from the wall outlet. Be sure to
unplug the unit if you do not intend to use it for an
extended period of time, such as a vacation.
● Keep this manual in a safe place for future reference.

Publicidad

loading