Lamborghini Caloreclima EM 50/2-E Manual Para La Instalación Y El Mantenimiento página 27

PRESSURE CURVES/GAS DELIVERY
These curves show the gas pressure, in millibars, (at points Pi and Pt along the gas train) necessary to produce a given delivery
in m 3 /h. The pressures have been measured with the burner working and with a pressure of 0 mbar in the combustion chamber. If
the chamber is pressurized, the gas pressure necessary will be that given in the diagram plus that in the combustion chamber.
Legend
1 Interception cock - airtight at 1 bar and pressure loss ≤
0.5 mbar.
2 Vibration-damping joint
3 Gas pressure point for pressure reading
4 Gas filter
5 Gas pressure regulator
6 Minimum gas pressure control device (pressure switch)
7 Class A solenoid safety valve. Closure time Tc ≤ 1".
8 Class A solenoid adjustment valve, with slow
EM 50/2-E
EM 70/2-E
BASIC GAS TRAIN
9 Gas delivery regulator, normally incorporated in either
10 Combustion head.
11 Minimum air pressure control device
12 Maximum gas pressure (over 350 kW) control device (on
13 Tightness control device (on request)
Thermal output
Thermal output
- 27
-
opening or various stages and incorporated gas delivery
adjustment device. Closure time Tc ≤ 1".
solenoid valve 7 or 8.
request)
Legend
Pi Inlet pressure
(combustion head + gas train)
Pt Pressure at combustion head