Descargar Imprimir esta página

Home Decorators Collection MAKENNA 56235 Guía De Uso Y Mantenimiento página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Hanging the Fan (continued)
3
Making the electrical connections
WARNING: Each wire nut supplied with this fan is
designed to accept up to one 12-gauge house wire
and two wires from the fan. If you have larger than
12-gauge house wiring or more than one house wire
to connect to the fan wiring, consult an electrician for
the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB)
supplied with your fan. Secure the connectors with
electrical tape and ensure there are no loose strands or
connections.
Spread the wires apart so that the green and whites are one
side of the outlet box and the black wire is on the other side.
Connect the green fan wires to the household ground wire (this
may be a green or bare wire) using a wire connecting nut (BB).
Connect the receiver (K) red or black wire to the household
black (hot) wire using a wire connecting nut (BB).
Connect the receiver (K) white wire to the household white
(neutral) wire using a wire connecting nut (BB).
Secure each wire connecting nut using electrical tape.
Wire the receiver (K) to the fan wires by connecting the molded
adaptor plug from receiver (K) with molded adaptor of the fan
motor assembly (C) together.
4
Installing the receiver
WARNING: To reduce the risk of fire or electrical
shock, remember to disconnect power. The electrical
wiring must meet all local and national electrical code
requirements. The electrical source and fan must
be 110/120 volt, 60HZ. Do not use this product in
conjunction with any variable wall control. Incorrect
wire connection can damage this receiver.
CAUTION: If other fan wires are different color, have this
unit installed by a licensed electrician.
CAUTION: Do not install the receiver (K) in a damp
location or immerse in water. For indoor use only. Do
not pull on or cut the receiver leads shorter. Do not
drop or bump the unit.
Push the receiver (K) into the bracket on the mounting plate (A)
as shown, flat side towards the ceiling.
K
White
Red or
Black
Black
K
8
Outlet box
Green or bare wire
BB
White
C
A
C
B

Publicidad

loading

Este manual también es adecuado para:

1008 271 600