Bryton Rider S 500 Manual página 2

Key Functions
A
B
Reboot Rider
Press ( / /
Getting Started
Please charge your device for at least 4 hours and make sure the device firmware is the latest
version* before first use. To begin: 1. Press
select the display language. 3. Choose the units of measurement. 4.
search for satellite signals. 5. After the "Satellite Acquired" message pops up, enter the Bike 1, Bike
2 or Bike 3 cycling page and enjoy your ride in free cycling mode.
recording.
*Check and update your device firmware version via Bryton Active.
*To acquire GPS, allow the device access to an open sky, outdoor environment.
Preloaded Map
Rider S500 includes regional preloaded maps. If the region you need is not pre-loaded, it can be
downloaded from the Bryton Website. Make sure the device has enough storage before adding a new
map. To download the map, please go to www.brytonsport.com >
Map.
*You can also add maps from Bryton Active App by connecting the device to your smartphone with a
USB cable.
1
C
D
/ ) at the same time to reboot the device.
to turn on the device. 2. Scroll through the list and
A
POWER/LOCK ( )
•
Long Press to turn the device ON.
•
Long Press to turn the device OFF.
•
Press to lock or unlock the screen.
B
LAP ( )
•
When recording, press to mark the lap.
C
RECORD ( )
•
In Cycling mode, press to start recording.
•
When recording, press to pause recording
and enter the Menu.
D
PAGE ( )
•
In Cycling mode, press to switch meter
screen pages.
The device will automatically
6. To record, press
(Menu) > Support > Download >
to start