Silvercrest SFR 3 A1 Instrucciones De Uso página 11

Inserting batteries
1) Pull off the battery compartment cover 2.
2) Insert the batteries as shown in the polarity diagram in
the battery compartment.
3) Slide the battery compartment cover 2 back on so
that it clicks into place.
Usage
Note: (1) This lint remover can damage structured
fabrics or very soft materials such as angora. Therefore,
always test the lint remover on an inconspicuous part of
the garment and turn the transparent part of the spacer 5
first to the level " " and then push the On/Off switch/
Speed switch 1 to speed level 1. The appliance now
runs at speed level 1. In this way you can gently test
whether the setting is sufficient for the garment without
damaging it. (2) This appliance should not be brought
into contact with moisture. Therefore, do not use the
lint remover on moist fabrics.
1) Lay the garment on a flat surface, such as an ironing
board. Ensure that the surface to be processed has no
wrinkles. Otherwise, the garment could be damaged.
2) Turn the spacer 5 to the desired position or remove
it completely (see Chapter "Removing/replacing the
spacer"):
–
" " for large bobbles and coarse textiles (large
distance to the cutter knives),
–
" " for medium-sized bobbles and textiles with
moderate structure (medium distance to the cutter
knives),
│ GB │ IE
■ 8
SFR 3 A1