Publicidad
Idiomas disponibles
Idiomas disponibles
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
a
=Vibration emission value
h, SG
K
=Uncertainty (vibration)
h,SG
Typical A-weighted sound levels:
L
= sound-pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty
pA
WA
h
= milling height in steps
1-3
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Electromagnetic disturbances:
In individual cases, the speed may fluctuate
temporarily if the machine is exposed to extreme
external electromagnetic disturbances or the
electronic restart protection may respond. In this
case, switch the machine off and on again.
ENGLISH en
11
Publicidad
