Publicidad
Idiomas disponibles
Idiomas disponibles
D - Unpacking the device and disposing of the packaging elements
Remove all packing materials from around the device, as well as any protective material inside
the device compartments.
The cardboard packaging and the sheets of paper are recyclable. They must be thrown in the
collection bins provided for this purpose.
Materials bearing the symbol
> PE <= polyethylene; PP <= polypropylene;
This means that they can be recycled by depositing them in appropriate collection containers.
The other packaging elements (adhesive, fasteners, etc.) must be disposed of with household
waste.To know more :www.quefairedemesdechets.fr
The packaging components (polystyrene, sachets, boxes, etc.) must be kept out of the reach of
children, as they represent sources of danger.
E - Connection to the electrical network
Warning
Before plugging in your appliance, make sure that the electrical voltage in your home
:
matches that indicated on the nameplate of the appliance.
Technical data and electrical connection conditions are indicated on the device nameplate.
Warning : This device must be connected to the electrical network by means of a differential circuit
breaker with a minimum distance of 3 mm between the contacts.
This circuit breaker must be sized for the load and comply with applicable standards (the switch
must not interrupt the earth wire).
Warning :do not use extension cords, power strips or adapters as this could cause the
electrical connections to overheat.
The power cable must be mounted in such a way that it never exceeds the ambient temperature
by more than 50ºC over its entire length.
Before proceeding with the connection, check that:
-
Installation electric may support the charged of the device
characteristics).
-
The electrical installation must be equipped with effective earthing in accordance with the
applicable standards.
-
The multi-pole socket or switch is easily accessible once the oven is installed.
are recyclable:
GB-15
(please refer to
Publicidad
