Publicidad
Idiomas disponibles
Idiomas disponibles
Warning :Do not clean the oven door while the glass parts are still hot.
If this precaution is not observed, the glass parts could break.
Do not use very abrasive cleaning products or a hard metal scraper to clean the oven glass door,
as they will scratch the surface and cause the glass to shatter.
For disassembly
1. Fully open the oven door: fully opening your oven door gives you access to its hinges.
2. Look closely at the hinges of the door to identify kinds of small hooks. These small hooks ar e
the locking tabs for the door hinges (figure 8.1)
3. Then proceedto the unlocking operation by lifting the small hooks using a screwdriver
(figure 8.2).
4. Set both oven door hinges to the same position.
5. Raise the door so that it contacts the hinge lock as shown in figure 9.1.
6. To easily remove the oven door, when it is almost closed, hold the door with both hands
and pull it up (figure 9.2).
7. Use glass cleaner to clean the oven door on the inside and outside. Rinse with clean wat er
and dry with a soft, dry cloth.
For reassemb ly
1. Position the door so that it faces the two hinges
2. Lower the small hooks using a screwdriver and set the two door hinges to the same position
3. Check that the locking operation is effective and close the oven door.
The inner glass can be removed, making cleaning easier. This operation is done cold only.
To remove the glass:
- fully open the door and press the plastic latches on each side of the door (Figure 10).
- pull the upper part of the door frame in your direction (Figure 11).
- lift the inner glass to remove it (Figure 12). Clean the glass then dry it.
To reassemble the window:
- replace the glass with the upper part of the door frame by pushing it towards the interior of
the oven.
- press the latches to lock the glass, close the oven door.
GB-25
Publicidad
