Publicidad
Idiomas disponibles
Idiomas disponibles
Remark :
The time setting function is activated 7 seconds after the oven is turned on.
SETTING THE MINUTE TIMER
With this function you can set the duration in minutes. After
expiration of the set time, an audible alert sounds.
Press the clock symbol once to access the beep setting function. The hourglass symbol starts
flashing on the screen.
The + and - buttons allow you to set the desired duration.
The setting can be made in increments of one minute up to 24 hours.
STOPPING THE ALARM RINGING
After the minute beep has expired, the alarm is triggered and its symbol flashes
on the screen.
You can stop the alarm and its symbol by pressing any button.
If you do not press any button, the alarm will automatically stop after 5 minutes, but the symbol
will continue to flash.
SEMI-AUTOMATIC COO ING
This feature allows you to start cooking immediately and set the desired cooking time.
After setting the oven to the desired function and temperature:
Press the clock button once, the cooking time and the semi-automatic cooking symbol will appear on the
display. Set the desired cooking time.
When the semi-automatic cooking symbol is continuously displayed on the screen, the setting is
complete and the time is displayed on the screen
You can end this function by pressing the button 3 times on the clock button. If this button is not
pressed, the setting will be automatically canceled after about 6 seconds.
AUTOMATIC COO ING
This feature allows you to delay the start of cooking and finish it at the desired time.
After setting the oven to the desired function and temperature:
Press the clock button once, the cooking time and the semi-automatic cooking symbol will appear on the
display. Set the desired cooking time.
Press the clock button again, the automatic cooking symbol and the end of cooking time appear on
the display. Set the desired end of cooking time.
When the symbolautomatic cooking mode is displayed continuously and flashes on the display, the
setting is complete but cooking has not yet started.
When automatic cooking is complete, the semi-automatic and automatic cooking symbols flash together.
You can end this function by pressing the clock button and turn off the alarm by pressing any button.
PYROLITIC MODE SETTING
Select the cooking mode, pyrolysis cleaning
Simultaneously press the + and - buttons for 3 seconds. The mode logo will appear on the screen.
Press the - or + button to select the pyrolytic function mode Where
and
wait 10
seconds.
GB-20
Publicidad
