LOWES JENSON DN84MBK6LR Manual Del Usuario página 14

FINAL INSTALLATION
4. Remove one motor plate screw (L) in motor plate on
underside of motor housing (E) and partially loosen
the other two motor plate screws (L). Align slotted
holes in fitter plate (H) with loosened motor plate
screws (L), allowing molex connections from motor
housing (E) to come through hole in the middle of
the fitter plate (H). Twist fitter plate (H) to lock.
Re-insert the motor plate screw (L) previously
removed and securely tighten all three motor plate
screws (L).
5. Remove one fitter plate screw (M) in post on
underside of the fitter plate (H) and partially loosen
the other two fitter plate screws (M).
Locate molex connections from motor housing (E)
and remove plastic that holds these two wires
together.
6. Connect WHITE wire from LED light kit (G) to
WHITE wire from motor housing (E). Connect
BLUE wire from LED light kit (G) to BLUE (or
BLACK) wire from motor housing (E). Make sure
molex connections snap together securely.
4
Motor
Plate
Molex
Connections
5
H
Molex
Connections
6
14
I L
I H
I L
M
M
BLUE (or BLACK)
WHITE
BLUE
WHITE
E
E
E
G