LOWES JENSON DN84MBK6LR Manual Del Usuario página 15

FINAL INSTALLATION
7. Carefully arrange wiring within the fitter plate (H) to
ensure wires do not get pinched when attaching the
LED light kit (G).
Align slotted holes in LED light kit (G) with loosened
fitter plate screws (M) on posts on fitter plate (H).
Twist LED light kit (G) to lock. Re-insert the
previously removed fitter plate screw (M) (Step 4,
page 13) and securely tighten all fitter plate screws
(M).
8. Align slots on shade (F) with protrusions on inside
of fitter plate (H). Turn shade (F) clockwise until it
no longer turns.
Pull down gently on the shade (F) to make sure it is
secured completely.
NOTE: Alternatively, if you wish to use fan
WITHOUT light kit, you may install metal cover (Q)
instead of shade (F).
9. If you wish to use the remote control bracket
from remote pack (P), install screws from remote
pack (P) through bracket and into the desired
installation site. The remote control transmitter
from remote pack (P) rests inside the bracket.
7
G
8
H
F
9
Wall
15
H
M
Protrusion
Slot
(or)
Q
P
Bracket
Screws
Remote Control
Bracket