General Safety Regulations - Zhermack ELITE MIX Manual Del Usuario

AUTHORIZED PERSONNEL
2.3
Personnel may be divided into the following categories:
• Operator-user:
Person trained to use the machines. He/she may carry out all the tasks needed to operate the
machines: these tasks include starting/stopping the machine, carrying out routine inspections and
any other tasks linked to everyday machine use.
The operator-user must only use the machine when it is fully assembled and the safety
devices are working properly as described in this manual.
Before using this machine or carrying out any work on it, the operator must read the
entire contents of this manual. This manual has been drawn up to provide the user
with essential information on rational, safe utilisation of the machine. The user must
comply with the information given at all times.
Furthermore, the user must use the work sheets enclosed with this manual so as to
keep a record of maintenance/component replacement work as well as make notes on
any machine malfunctions.
• Zhermack authorised maintenance technician:
Person authorised to carry out work on the machine under all operating conditions and all safety
levels. He/she is also authorised to carry out any mechanical or electrical repairs/adjustments,
scheduled maintenance and any component replacement work.

GENERAL SAFETY REGULATIONS

2.4
The operator must read the advice and warnings given below and comply with such regulations at all
times: doing so will ensure safe, long-lasting machine performance.
• Do not allow untrained personnel to use this machine.
• Ensure that the work area is properly prepared: it must be free from obstacles, clean and properly
illuminated.
• Take measures to ensure that you are not distracted when using the machine.
• In the event of a malfunction follow the advice given in this manual: if you have any doubts shut
down the machine and contact your Authorised Service Centre immediately.
• Never use a malfunctioning machine and always inform the Maintenance Manager of any faults.
• Do not open compartments containing electrical parts.
• Do not replace the power lead or tamper with the supplied plug.
• It is forbidden to use the machine on items other than those for which it has been specifically designed.
• Before doing any cleaning, routine and/or unscheduled maintenance work make sure that the
machine has been unplugged from the mains socket.
• Make sure that there are no foreign objects inside the work area as these could damage the machine
and/or injure personnel.
• Do not use petrol or flammable solvents as detergents; use only non-flammable, non-corrosive, and
non-toxic substances (see paragraph 8.1).
• Do not used compressed air to clean small pieces; if you do so you should protect your eyes with
goggles that provide lateral protection and limit air pressure to a maximum of 2 bar.
106 of 264
MAINTENANCE AND USE MANUAL
EN
ELite mix