Safety Systems - Zhermack ELITE MIX Manual Del Usuario

MAINTENANCE AND USE MANUAL
The machine must not be used with any of its parts disassembled: before using the
machine make sure that all its components are properly in place.
To ensure that work is done in absolute safety always make sure that you follow the
described procedures with caution.
To provide greater clarity the numbers given in the diagrams in the following
paragraphs correspond exactly to the numbering in Chapter 3 in the "Machine
Description" section.
To ensure maximum reliability Zhermack uses only the finest raw materials and components; all
machines are put through stringent tests prior to delivery.
All materials are of the finest quality and are checked on delivery, during storage and when used in
the factory so as to prevent any damage, deterioration and/or malfunction.
All structural parts, connections and controls have been designed and built to very high safety
standards and are capable of resisting strains/overloads that are anomalous or in any case higher
than those given in this manual.
elite mix mixers also feature a safety fuse, designed to protect both machine and operator from
overloads.
Utilisation of the machine for any purpose other than that for which it has been
specifically designed is strictly forbidden. The manufacturer cannot be held liable for
any damages caused by improper use and/or utilisation for purposes other than those
stated in this manual.
Fig. 5: before preparing the material to be mixed it is
advisable to choose the programme you want to use so
that time is not lost prior to mixing. Remember that the
display always shows the last programme used.
ELite mix
EN
CHAPTER 7: USING THE MACHINE
WARNINGS

SAFETY SYSTEMS

USING THE MACHINE
P00 Elite Rock
mixing time 00:30
2
3
Figure
119 of 264
7.1
7.2
7.3
5