cecotec BOLERO SQUAD I 2100 Manual De Instrucciones página 88

ENGLISH
Connecting the hob to the mains (Fig. 7):
The induction hob must be connected to the mains by a suitably qualified person. Before
connecting the hob to the mains, check that:
1. Your home wiring system is suitable for the power consumption of the cooking hob.
2. The mains voltage matches the voltage stated on the rating label of the appliance.
3. The power cable sections can withstand the load specified on the product rating label.
To connect the hob to the mains, do not use adapters, reducers, or branching devices, as
they may cause overheating or fire.
The power cord should not be in contact with any hot parts and must be positioned so as
-
to avoid its temperature exceeding 75 °C.
Check with an electrician whether your home wiring system is suitable without modifying
-
it. Any modifications should only be carried out by a qualified electrician.
- If the cable is damaged, it must be replaced by the manufacturer, the supplier, or qualified
personnel to avoid hazards.
If the appliance is connected directly to the mains, a single-pole residual current circuit
-
breaker with a minimum contact separation of 3 mm must be installed.
The person in charge of the installation must ensure that a correct electrical connection
-
has been made and that it complies with safety regulations.
Do not bend or press the cord.
-
Check the cord for damage regularly. It must only be replaced by a duly qualified person.
-
4. OPERATION
No. Reference
1
2
3
4
88
BOLERO SQUAD I 2100
Description
On/off: switch on or off the appliance.
Child lock: press the icon once and the appliance will lock.
The other icons will not work if the child lock is activated. To
unlock, press the icon for some seconds.
Slider: increases or reduces the power level.
Booster function.