Descargar Imprimir esta página

IKEA LAGAN Manual Del Usuario página 51

Ocultar thumbs Ver también para LAGAN:

Publicidad

Idiomas disponibles

Idiomas disponibles

• If there is residual detergent after
cleaning, wipe it with cold water and
dry with a clean and dry microfiber
cloth. Residual detergent residue may
damage the glass surface next time.
• Under no circumstances should the
dried-up residue on the glass surface
be cleaned off with serrated knives,
wire wool or similar scratching tools.
• You can remove the calcium stains
(yellow stains) on the glass surface
with the commercially available
descaling agent, with a descaling agent
such as vinegar or lemon juice.
• If the surface is heavily soiled, apply
the cleaning agent on the stain with a
sponge and wait a long time for it to
work properly. Then clean the glass
surface with a wet cloth.
• Discolorations and stains on the glass
surface are normal and not defects.
Plastic parts and painted surfaces
• Clean plastic parts and painted
surfaces using dishwashing detergent,
warm water and a soft cloth or sponge
and dry them with a dry cloth.
• Do not use hard metal scrapers and
abrasive cleaners. It may damage the
surfaces.
• Ensure that the joints of the
components of the appliance are not
left as damp and with detergent.
Otherwise, corrosion may occur on
these joints.
Cleaning the accessories
Unless otherwise stated in the user
manual, do not wash the product
accessories in the dishwasher.
Cleaning the control panel
• When cleaning the panels with knob
control, wipe the panel and knobs with
a damp soft cloth and dry with a dry
cloth. Do not remove the knobs and
gaskets underneath to clean the
control panel. The control panel and
knobs may be damaged.
• While cleaning the inox panels with
knob control, do not use inox cleaning
agents around the knobs. The
indicators around the knobs may be
deleted.
• Clean the touch control panels with a
damp soft cloth and dry with a dry
cloth. If your product has a key lock
feature, set the key lock before
performing control panel cleaning.
Otherwise, incorrect detection may
occur on the keys.
Cleaning the inside of the oven
(cooking area)
Follow the cleaning steps described in
the "General cleaning information"
section according to the surface types in
your oven.
Easy Steam Cleaning
It ensures easy cleaning because the dirt
(having waited not for too long) is
softened with the steam that forms
inside the oven and the water drops
condensing on the inner surfaces of the
oven.
1. Remove all accessories inside the oven.
2. Pour 500 ml of water into the oven tray
and place the tray at the 2nd rack of
the oven.
51/EN

Publicidad

loading