Publicidad
Idiomas disponibles
Idiomas disponibles
noise and resume normal
(quiet) monitoring.
r To transmit, monitor the
channel and make sure it
is clear.
Press and hold the PTT
switch. Speak into the
microphone area of the
front panel grille in a
normal voice level. To return to the Receive mode, re-
lease the PTT switch.
r Press (or press and hold)
the SIDE-1 or SIDE-
2 button to activate one
of the pre-programmed
functions programmed
using CE156 software
by your Motorola Solu-
tions authorized dealer. See the next chapter for details
regarding feature availability for this radio.
12
o
Peration
r If a Speaker/Microphone
is available, remove the
plastic cap and its two
mounting screws from
t h e r i g h t s i d e o f t h e
transceiver, then insert
the plug of the Speaker/
M i c r o p h o n e i n t o t h e
MIC/SP jack; secure
the plug using the screws supplied with the Speaker/
Microphone. Hold the speaker grille up next to your
ear while receiving. To transmit, press the PTT switch
on the Speaker/Microphone, just as you would on the
main transceiver's body, and speak into the micro-
phone on a normal voice level.
Note 1): Save the original plastic cap and its mount-
ing screws. They should be reinstalled when not us-
ing the Speaker/Microphone.
2) When you press the PTT switch on the Speaker/
Microphone, it disables the internal microphone, and
vice versa.
r This radio have two modes of DMR operation to max-
imize spectrum efficiency. Standard operation requires
use of a TDMA repeater (such as the EVX-R70) to
utilize the repeater's dual time slot capability for dou-
bling your radio fleet's communication paths for up
EVX-261 O
M
pErating
anual
Publicidad
