Publicidad
Idiomas disponibles
Idiomas disponibles
s
s
can
et
Scan Set enables the user to add or delete a current chan-
nel temporarily to a pre-programmed scan list.
t
a
alK
round
Talk Around is most commonly utilized when operating
on duplex channel systems (separate receive and transmit
frequencies, common with use of a repeater station). The
Talk Around feature allows you to bypass the repeater
station and talk directly to a nearby station or transceiver.
This feature has no effect when you are operating on
"simplex" channels, where the receive and transmit fre-
quencies are already the same.
Note that your dealer may have mode provision for "Talk
Around" channels by programming "repeater" and "Talk
Around" frequencies on two adjacent channels. If so, the
key may be used for one of the other Pre-Programmed
Functions.
r
eset
When operating in the selective call feature, resets the
communication by an assigned PF key.
c
all
Send a pre-programmed 2 Tone/5 Tone call signal with a
one touch PF key.
EVX-261 O
M
pErating
a
dvanced
anual
o
Peration
c
1
c
3
all
to
all
Recalls the pre-programmed stations with a one touch PF
key.
s
d
Peed
ial
Your Motorola Solutions dealer may have pre-pro-
grammed Auto-Dial telephone number memories into
your radio.
To dial a number:
Press, (or press and hold), the assigned PF key to send a
pre-defined DTMF tone. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
d
uty
The Duty function is specific to paging operation. When
Duty mode is "ON" the user will hear all traffic (specific
to sub audio signaling) on the paging channel. The paging
alert will sound when the programmed 2 Tone or 5 Tone
sub audio signal is received.
If Duty mode is "OFF", normal radio traffic is not heard
on the paging channel. The radio will only unmute and
sound the paging alert with the programmed 2 Tone or 5
Tone signal is received.
19
Publicidad
