Publicidad
Idiomas disponibles
Idiomas disponibles
to two simultaneous transmissions. The second mode
is Direct mode, which enables two communications
paths on a single frequency, doubling your capacity
with only the subscriber radios. No repeater is neces-
sary when operating in Direct mode.
r If the BCLO (Busy Channel Lockout) feature has been
programmed on an analog channel, the radio will not
transmit when a carrier is present. Instead, the radio
will generate short beep three times. Release the PTT
switch and wait for the channel to be clear of activity.
r If the BTLO (Busy Tone Lockout) feature has been
programmed on an analog channel, the radio can
transmit only when there is no carrier being received
or when the carrier being received includes the correct
tone (CTCSS tone or DCS code) on an analog chan-
nel.
r If the CCLO (Color Code Lockout) feature has been
programmed on a digital channel, the radio can trans-
mit only when there is no carrier being received or
when the carrier being received includes a different
code that you have set on a digital channel.
EVX-261 O
M
pErating
o
anual
Peration
Digital Mode Specific Features
When operating on a digital channel, a priority user can
be assigned a variety of control functionality when pro-
grammed with the CE156 software. The control feature
descriptions are as follow:
Radio Check:
A priority user radio might check your state. When
your radio receive the "Radio Check" command, your
radio respond the ACK command to the priority user
radio automatically.
Interrupt:
A priority user radio can interrupt a current transmis-
sion on an active channel, ending the transmission
prematurely and opening the channel for a priority or
critical message.
Stun:
A priority user (assigned when programming the ra-
dio) can temporarily disable or "stun" a radio in the
fleet if the radio has been compromised or is being
abused. The stunned radio can be revived using the
"Revive" command on the radio that initiated the stun
command.
Revive:
A stunned radio can be revived by a priority user
through the use of the "Revive" command.
13
Publicidad
