Epg; Sleep Function; System Upgrading - Sveon SDT8200 Manual De Usuario

SDT8200 - User Guide

14.7 EPG

For further information about EPG function please go to the 9.1 section of this user guide.

14.8 Sleep function

If you want to enable the Auto- Turned off (Sleep mode) press the button "Timer" of the remote control and use the
arrow buttons left and right to enable the option.
Please enter the time when you want to turn the device off automatically.
You can also enable the Sleep Mode from the menu "Time" (enter in "Sleep Mode" section the value for auto turned
off option).

15. System upgrading

The device allows you to upgrade its software to include
improvements.
Please follow these steps to upgrade the software of your
devie:
1. Copy the upgrading file "SDT8200_XXXX.AP" in an
external USB device and connect the device to the unit
through its USB Host port.
2. Go to "Multimedia" menu, select the option "Music" and
the, select the file you have copy before.
3. Press "OK" to confirm. When the process finishes, the
system requires to disconnect the device and connect it
again.
Important. During software upgrading the device can not be disconnected from the power outlet and the USB de-
vice can not be unplugged; it may cause several damages to the device.
Don´t hesitate to contact with our Technical Department by phone (+34 902 402 503) or by email:
soporte@sveon.com.
Download the upgrades only from our official website: www.sveon.com.
www.sveon.com
English
56