Installation; Optional Accessories - Cameo ZENIT B200 Manual De Usuario

INSTALLATION

Thanks to its integrated plastic feet, the lamp can be positioned in a suitable location on a level surface. Installation
on a traverse is carried out with an Omega bracket, mounted in the centre of the base of the device (A). A Omega bracket is included. Suit-
able beam clamps are available as an option. Ensure firm connections and secure the spotlight to the securing lug (B) with a suitable safety
cable. Beam angle of the LED unit is independent of the device and is adjusted with the side-mounted thumb screws.
Important: Overhead installation requires extensive experience, including the calculation of the load limits for
the installation materials used and the regular safety inspection of all installation materials and lights.
If you do not have these qualifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional.

OPTIONAL ACCESSORIES

CLZW300B2004b
Barn doors – Tool-free installation by spring-loaded locking pins,
safety cable included
CLZW300B200SMLSD40
45° diffuser
Tool-free installation via SNAPMAG
16
technology
®
B
A
CLZW300B200SMLSD20
25° diffuser
Tool-free installation via SNAPMAG
CLZW300B200SMLSD100
100° diffuser
Tool-free installation via SNAPMAG
technology
®
technology
®