PowerWalker LiFe Battery System 48-100 Manual De Instrucciones página 15

ID Switch
ID Switch indicates the unique ID code for each battery

module. It's required to assign a unique ID to each battery
module for normal operation.
We can set up the ID code for each battery module by

rotating the PIN number on the ID switch. From number 0
to 9, the number can be random; no particular order.
If more than one battery module in the parallel system, the

battery pack connected to the inverter module is the
Master battery and the ID code should be set as 0.
The ID code of the remaining battery module MUST be
unique. Do not set the same number for 2 battery modules
in the parallel system.
Maximum 10 battery modules can be operated in parallel.

PIN Definition
1 CANH
2 CANL
3 PresentA
4 PresentB
5 NC
6 NC
PIN
0
1
2
3
4
5
6
7
8
9
12
Definition
0x0F
0x0E
0x0D
0x0C
0x0B
0x0A
0x09
0x08
0x07
0x06