Publicidad
Idiomas disponibles
Idiomas disponibles
arcs or sparks, which may cause fire or personal injury.
2) Ensure that the cables you prepared meet local regulations.
3) Wiring must be correct. Do NOT misconnect the positive and
negative cables. Also, avoid short circuit with any device. To avoid
electric shock, the copper and contact of the wire should NOT
expose outside without protection.
4) It is prohibited to connect the battery and AC power directly.
5) Do not connect the battery with PV solar wiring directly.
6) The embedded BMS in the battery is designed for 51.2 VDC, please
DO NOT connect the battery in series.
7) Please ensure the electrical parameters of the battery system are
compatible with related equipment.
8) Keep the battery away from water and fire.
9) Do not expose battery to flammable or harsh chemicals or vapors.
10) Obtain approval from the national and local electric utility company
before connecting the equipment to the grid.
1.3 In Use
Notice
For the first use, it is highly recommended to recharge the battery
to full (more than 90%) of the capacity.
Danger
All the battery terminals must be disconnected for maintenance.
1)
If the battery system needs to be moved or repaired, the power
2)
must be cut off and the battery is completely shut down.
2
Publicidad
