Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Timing chain holding tool, to be used as OEM 177589014000
2
Camshaft holding tool, to be used as OEM 177589014000
3
Camshaft alignment tool, to be used as OEM 177589014000
4
Camshaft adjuster holding tool, to be used as OEM 177589014000
5
Crankshaft alignment pin, to be used as OEM 177589001500
6
Fixing screws, to be used as OEM 177589014000
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This engine timing tool set is used to check and set the engine timing on Mercedes engines M176,
M177 and M178, installed in models see vehicle list below.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for Mercedes M176 / M177 / M178
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70113
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
