Mitsubishi Electric CITY MULTI PKFY-P VKM-E Serie Manual De Instrucciones página 10

. Ti er
7. Press the appropriate Temperature set button 3 to set the desired
temperature (at 7).
* Each press changes the setting, in the following sequence: No
display (no setting) 24
23 No display.
(Available range: The range for the setting is 12 °C to 30 °C.
The actual range over which the temperature can be controlled,
however, will vary according to the type of the connected unit.)
8. After making the appropriate settings at Steps 5, 6 and 7, press the
button 4 to lock in the values.
Filter
To clear the currently set values for the selected operation, press
and quickly release the Check (Clear) button 0 once.
* The displayed time setting will change to "—:—", and the On/Off
and temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check
(Clear) button 0 for 2 seconds or more. The display will begin
flashing, indicating that all settings have been cleared.)
Note:
Your ne entries ill e cancelled if you press the Operation
(Bac ) utton 2 efore pressing the Filter
If you have set t o or ore different operations for e actly the sa e
ti e, only the operation ith the highest Operation No.
out.
9. Repeat Steps 3 to 8 as necessary to fill as many of the available
cells as you wish.
10. Press the Operation mode (Back) button 2 to return to the
standard control screen and complete the setting procedure.
11. To activate the timer, press the Timer On/Off button 9, so that the
"Timer Off" indication disappears from the screen. Be sure that
the "Ti er Off" indication is no longer displayed.
* If there are no timer settings, the "Timer Off" indication will flash
on the screen.
<Ho to Vie the ee ly Ti er Settings>
8
SUN
TIMER
1. Be sure that the weekly timer indicator is visible on the screen (at
1).
2. Press the Timer Menu button 2 so that "Monitor" is indicated on
the screen (at 8).
3. Press the Timer On/Off (Set Day) button 9 as necessary to select
the day you wish to view.
operation button (7 or 8) as necessary to
4. Press the or
change the timer operation shown on the display (at 9).
* Each press will advance to the next timer operation, in order of
time setting.
5. To close the monitor and return to the standard control screen,
press the Operation mode (Back) button 2.
<To Turn Off the ee ly Ti er>
Press the Timer On/Off button 9 so that "Timer Off" appears at
0
<To Turn On the ee ly Ti er>
Press the Timer On/Off button 9 so that the "Timer Off" indication (at
goes dark.
0
1
25 ... 29 30 12
ode
utton 4.
ill e carried
Timer Settings
9
ON
OFF
°C
1
WEEKLY
.
TIME SUN
°C
°C
WEEKLY
TIME SUN
°C
°C
WEEKLY
.1.2. Si ple Ti er
You can set the simple timer in any of three ways.
... The air conditioner starts when the set time has elapsed.
The air conditioner stops when the set time has elapsed.
The air conditioner starts and stops at the respective elapsed times.
The simple timer (start and stop) can be set only once within a 72-
hour period.
The time setting is made in hour increments.
Note:
1. ee ly Ti er Si ple Ti er Auto Off Ti er cannot e used at the sa e
ti e.
2. The si ple ti er
in effect.
The ti er is off the syste
progress the re ote controller is undergoing self-chec or re ote
controller chec
user is in the process of setting the ti er the syste
control. (Under these conditions, On Off operation is prohi ited.)
2
<Ho to Set the Si ple Ti er>
2
1. Be sure that you are at a standard control screen, and that the simple
timer indicator is visible in the display (at 1).
When something other than the Simple Timer is displayed, set it to
SIMPLE TIMER using the function selection of remote controller (see
8.[4]–3 (3)) timer function setting.
2. Press the Timer Menu button 2, so that the "Set Up" appears on the
screen (at 2). (Note that each press of the button toggles the display
between "Set Up" and "Monitor".)
3. Press the ON/OFF button 1 to display the current ON or OFF simple
timer setting. Press the button once to display the time remaining to
ON, and then again to display the time remaining to OFF. (The ON/
OFF indication appears at 3).
The air conditioner will start operation when the specified number of
hours has elapsed.
The air conditioner will stop operation when the specified number of
hours has elapsed.
4. With "ON" or "OFF" showing at 3: Press the appropriate Set Time
)
button 1 as necessary to set the hours to ON (if "ON" is displayed) or
the hours to OFF (if "OFF" is displayed) at 4.
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF setting
(see step 3) and then press the Check (Clear) button 0 so that the
time setting clears to "—" at 4. (If you want to use only an ON setting
or only an OFF setting, be sure that the setting you do not wish to use
is shown as "—".)
ill not operate hen any of the follo ing conditions is
is in alfunction state a test run is in
the user is in the process of selecting a function the
1 9
4 Timer Setting
Action (On or Off)
3
Hr ON
AFTER * "— —" is displayed if there is no
setting.
1
SIMPLE
is under central
1
2
4
0