Mitsubishi Electric CITY MULTI PKFY-P VKM-E Serie Manual De Instrucciones página 9

. Ti er
.1. For ired Re ote-controller
You can use Function Selection of remote controller to select which of
three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto
Off timer.
.1.1. ee ly Ti er
The weekly timer can be used to set up to eight operations for each
day of the week.
together with a temperature setting, or ON/OFF time only, or
temperature setting only.
conditioner carries out the action set by the timer.
Time setting resolution for this timer is 1 minute.
Note:
1. ee ly Ti er Si ple Ti er Auto Off Ti er cannot e used at the sa e
ti e.
2. The ee ly ti er ill not operate
in effect.
The ti er feature is off the syste
is in progress the re ote controller is undergoing self-chec or re ote
controller chec the user is in the process of setting a function the user
is in the process of setting the ti er the user is in the process of setting
the current day of the ee or ti e the syste
(Specifically, the syste ill not carry out operations (unit on, unit off, or
te perature setting) that are prohi ited during these conditions.)
Operation No.
4 2
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
2 1
hen any of the follo ing conditions is
is in an alfunction state a test run
is under central control.
Day Setting
3
SUN
ON
1
°C
WEEKLY
3
ON/OFF
1
2
FILTER 4
CHECK TEST
0
OPERATION CLEAR
9 78
<Ho to Set the ee ly Ti er>
1. Be sure that you are at a standard control screen, and that the weekly
timer indicator 1 is shown in the display.
2. Press the Timer Menu button 2, so that the "Set Up" appears on the
screen (at 2). (Note that each press of the button toggles the display
between "Set Up" and "Monitor".)
3. Press the Timer On/Off (Set Day) button 9 to set the day. Each
press advances the display at 3 to the next setting, in the following
4. Press the or operation button (7 or 8) as necessary to select
the appropriate operation number (1 to 8) 4.
* Your inputs at Steps 3 and 4 will select one of the cells from the
matrix illustrated below.
(The remote-controller display at left shows how the display would
appear when setting Operation 1 for Sunday to the values indicated
below.)
Setup Matri
Op No. Sunday Monday
No. 1
No. 2
...
No. 8
<Operation 1 settings for Sunday>
Start the air conditioner at 8:30, with
the temperature set to 23 °C.
Note:
By setting the day to "Sun Mon Tues
sa e operation to e carried out at the sa e ti e every day.
(E a ple: Operation 2 a ove, hich is the sa e for all days of the
<Setting the ee ly Ti er>
Shows the time 5 6 Shows the selected operation (ON or OFF)
setting * Does not appear if operation is not set.
SUN
ON
°C
WEEKLY
5. Press the appropriate Set Time button 1 as necessary to set the
desired time (at 5).
* As you hold the button down, the time first increments in minute
intervals, then in ten-minute intervals, and then in one-hour
intervals.
6. Press the ON/OFF button 1 to select the desired operation (ON or
OFF), at 6.
* Each press changes the next setting, in the following sequence:
... Saturday
<Operation 2 settings for every day>
Turn off the air conditioner at 10:00.
ed Thurs Fri Sat", you can set the
ee .)
Shows the temperature setting
7
* Does not appear if temperature is
not set.