Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TRANSMISSION
The transmission is already greased in the fac-
tory, so that you have a ready -to -use product;
However, if for any reason you had to serve the
transmission, there is a drain screw. It will be
more easily accessible
If you remove the blades. Be sure to clean eve-
rything before serving so that no dirt can stay in
the transmission. High quality transmission fat
is recommended.
BINKER
Please follow the following steps in order to store your device after each use and at the end of
season :
•
Clean the motobine as described in the previous section.
•
Inspect the blades and leave them, if necessary (see the start of the «Maintenance» section).
•
Grease and lubricate the different moving parts.
•
Store the electrical tool in the shelter, in a cool and dry place, out of reach of children. Avoid storing
it close to corrosive substances, such as fertilizers, diluers or fuels.
•
Do not cover your machine with a waterproof tarpaulin; By condensation, the humidity retained may
damage the metallic and electronic components of your motorcycle.
•
At the end of the season in addition to previous instructions, you must protect your machine from
frost and humidity. You can fold the different parts of the handle, loosening the ties.
RECYCLE AN ELECTRICAL DEVICE
The components of your electric machine can contain dangerous elements for the environment and
should not be thrown into the wild or with your household waste. In order to avoid any risk for the
planet, here is the procedure to throw your tool:
•
Cover the terminals of the socket with adhesive tape.
•
Do not try to dismantle or access the components of the device.
•
Do not incinerate the machine.
•
Throw the elements in a recycling center or an approved recycling center.
44
M10×10
Ø7,5×Ø1,8
30/10/2023
Publicidad
