Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning & Maintenance
Change of door direction
Illustration 1 shows the position of the components before reversing the door.
Figure 2 shows the position of the components after the door has been reversed.
This refrigerator has been manufactured with the door hinges on the right-hand side.
If you wish to change the opening direction, follow the instructions below:
1. Remove the plastic cover (7) and screws (6) securing the top to disassemble it.
2. Remove the screws (1) securing the top hinge (5) (right side) to the frame. Remove the top hinge (5).
3. Lift the door and place it on a cushioned surface to avoid scratches.
4. Remove the screws (8) holding the lower hinge (2) and be sure to remove the lower hinge (2).
5. Remove the left front leg (4) and place it on the right side.
6. Before installing this lower hinge (2), remove the bolt (9) and reverse the direction of the lower hinge
(2). Then install the lower hinge (2) on the left side of the lower frame with the two screws (8).
7. Insert the bolt (9) into the lower hinge (2).
8. Put the door in place making sure that it fits into the bottom hinge (2).
9. While holding the door closed, attach the upper hinge (5) to the upper frame on the left side with the
two screws (1). Remember, please do not tighten the two screws (1) until the top of the door is flush with
the bottom.
10. Install the top casing with the screws (6) and install the cover.
Change of direction of the
freezer door:
1. Unscrew the bottom hinge of the freezer door. Then remove the door and place it
on a soft surface to avoid scratches.
3. Move the hinge hole co-
ver from the left side to the
right side.
2. Move the door bracket from the left side to the right
side.
4. Rotate the freezer door and pla-
ce the hinge side on the left side.
Then fix the door with the bracket.
31
English
infiniton.es
Publicidad
