Publicidad
Idiomas disponibles
Idiomas disponibles
PLEASE READ THE INSTALLATION & OPERATIONS INSTRUCTIONS BEFORE USING
SPECIFICATIONS:
Model: ES4195
Voltage: 110-120/60Hz
Total Amps: 12.5A
Total Watts: 750-1500W
Heating Ratings: 1400W (+5%-10%)
Dimensions, Inches (H x W x D):
Stove:
15.36 x 9.65 x 17.72
Product Diagram
ZONE HEATING SAVES!
The concept of Zone Heating is simple. Use High Efficiency heaters to heat the rooms you use most during the
times you use these areas and turn back the thermostat to your central heating system. To achieve the
maximum benefit, it is important to understand your heater and where best to locate it.
Please follow these suggestions:
1.
Close doors to areas you do not wish to heat.
2.
Locate a three-prong outlet along an interior wall if possible. Position the heater so that the warm air
can blow unobstructed across the room towards the exterior walls.
3.
Check your windows and doors for the infiltration of cold air and insulate as needed to avoid heat
loss. Rapid heat loss will minimize the effectiveness of your Infrared heater as it would any
conventional type of heater.
4.
Keep the area around the heater free of obstructions to insure maximum airflow. Keep electrical
cords, drapery, furniture, and other combustibles 3 feet (0.9 M) away from the front of the heater
and away from the sides.
5.
Avoid locating your heater in high traffic areas or in direct sunlight.
6.
Avoid locating your heater near your central heating thermostat.
THIS APPLIANCE
Flame Effect
Heating Element
CLEARANCE TO COMBUSTIBLES
Back......................................6 "
Sides.......................................6"
Top......................................24"
Front...................................36"
Control Panel
~ 2 ~
Publicidad
