Next Level Racing ELITE Serie Manual De Instrucciones página 20

support@nextlevelracing.com
)
A
28 A) Remove the Seat Sliders.
B) Install 2 x T-Nuts into the bottom channel of both Seat Slider Members and 2 x T-Nuts into the side channel of the front Seat
Slider member. Slide T-Nuts to the marked locations.
)
A
A) Align the holes and slots on the Seat Brackets with the T-Nuts that were securing the Seat Slider Members to the frame of
29
the cockpit. Bolt through and secure with M8 Ratchet Handles.
B) Align the T-Nuts previously installed into the Seat Slider members in Step 28(b) with the slots on the Seat Brackets. Bolt
through and secure with M8 Bolts and Washers.
30
Install Extrusion End Plates to the rear Seat Slider member and secure with Countersunk Bolts
previously uninstalled in Step 27(b).
)
B
T-NUTS LOCATION
REAR VIEW - Front Seat Slider
BOTTOM VIEW - Front and Back Seat Sliders
)
B
20
PARTS:
• • 6 x T-Nuts
(Use T-Nuts compatible with the channel of your cockpit)
OR
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
PARTS:
• • 2 x Extrusion End Plates