Next Level Racing ELITE Serie Manual De Instrucciones página 21

)
A
A) Align the holes on the Locking Corner Blocks with the threaded holes on the Seat Slider members. Bolt through and secure
31 with 2 x M8 Bolts and Washers.
B) Align the slots on the Locking Corner Blocks with the T-Nuts installed in Step 28 (b). Bolt through and secure with 2 x M8
Bolts and Washers.
C) Bolt through the Locking Corner Block slots and Seat Bracket slot. Secure with 2 x M8 Flange Nuts.
SIDE HOTAS SETUP
32 Install 2 x T-Nuts into both inner and outer channels of the Vertical Post on the side you would like to
install the HOTAS. Slide T-Nuts to the marked location.
)
A
33
A) Align the holes on the Centre Pole Adaptor with the T-Nuts previously installed in Step 32.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
Video Instruction: bit.ly/nlrbuild
)
B
)
C
(T-Nut Locations)
)
B
21
PARTS:
• • 2 x Locking Corner Blocks
• • 6 x M8 16mm Bolts
• • 6 x M8 Washers
• • 2 x M8 Flange Nuts
PARTS:
• • 4 x T-Nuts
(Use T-Nuts compatible with the channel of your cockpit)
OR
PARTS:
• • 1 x Centre Pole Adaptor
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers