Trevi TT 1042 DAB Manual De Usuario página 7

ENGLISH TT 1042 DAB
COMMANDS DESCRIPTION
1. Turntable rotation axis
2. Turntable platter
3. Lever to raise / lower the arm
4. Turntable arm
5. Autostop selector
6. Speed selector (33/45/78 rpm)
7. Arm safety hook
8. / / MENU button
9. 9 button, previous track / radio station
10. : button, next track / radio station
11. AUX IN input
12. USB input
13. On / standby button / volume adjustment
14. LCD display
15. Headphone socket
16. MODE button
17. INFO button
18. SCAN / ENTER button
19. Loudspeakers
20. RCA LINE OUT
21. Power socket for external power supply
22. FM antenna
POWER SUPPLY
This unit works with 12V 1A power supply (supplied).
Do not connect the appliance to sockets with a voltage other than that indicated.
ON / OFF
1. Plug the supplied power supply cable into the power socket (21) on the device and the power supply plug into a power socket.
2. Turn the knob (13) clockwise until you hear a click, the appliance will switch on.
3. Turn the knob (13) anticlockwise again to switch off the appliance.
This appliance is equipped with an automatic shutdown system for energy saving. After a certain period of inactivity, the appliance
will automatically go into standby mode. Switch the appliance off and on again for a new use.
In the event of blockage or incorrect operation, carry out a general reset by switching the appliance off for about 30 seconds and
then switching it back on.
VOLUME CONTROL
1. Turn the Volume Control (13) on the set to increase or decrease the volume.
FM RADIO OPERATION
1. Switch on the device and press the MODE button (16), the FM indication will appear on the display.
2. Repeatedly press buttons : (10) or 9 (9) on the unit to perform a step-by-step search.
3. Press and hold the buttons : (10) or 9 (9) on the unit for a few seconds to tune to the next or previous radio station with the
best received signal.
4 To store a radio station:
- Move to the frequency to be stored, press the INFO key for a long time.
- With the keys : (10) or 9 (9) select the memory number in which you want to save the radio station.
- Press the SCAN / ENTER key (18) to confirm.
- The unit can store up to 20 stations.
7