Trevi TT 1042 DAB Manual De Usuario página 8

ENGLISH
5. To select a stored radio station:
- Press the INFO button.
- With the keys : (10) or 9 (9) select the memory number of the radio station.
- Press the SCAN / ENTER key (18) to confirm.
6. To scan with automatic storage of radio stations, long press the SCAN / ENTER key (18).
The unit can store up to 20 stations.
Note: To obtain the best FM reception, extend and orient the antenna (22). If the reception is not good, try to adjust the length and orientation
of the antenna differently, however the quality of FM reception depends very much on the place where the device is placed.
DAB RADIO OPERATION
1. Switch on the device and press the MODE button (16), the DAB indication will appear on the display.
2. The first time the appliance is switched on, it will perform an automatic search for the available stations, the stations found will
remain memorized at subsequent switch-ons.
3. Press the buttons : (10) or 9 (9) on the unit to select a different DAB radio station, confirm with SCAN / ENTER (18).
4. Press the / button (8) to show various information on the display broadcast by the DAB station.
5. To store a radio station:
- Move to the frequency to be stored, press the INFO key for a long time.
- With the keys : (10) or 9 (9) select the memory number in which you want to save the radio station.
- Press the SCAN / ENTER key (18) to confirm.
- The unit can store up to 20 stations.
6. To select a stored radio station:
- Press the INFO button.
- With the keys : (10) or 9 (9) select the memory number of the radio station.
- Press the SCAN / ENTER key (18) to confirm.
7. To scan with automatic storage of radio stations, press at length the SCAN / ENTER key (18).
The unit can store up to 20 stations.
SETTINGS IN FM / DAB RADIO MODE
In FM Radio or DAB mode, press and hold the / / MENU 'key (8) to show various settings, press the 9 or : keys to select
the desired item and confirm with the SCAN / ENTER key (18) to enter in settings:
Scan setting (FM): allows you to select whether during the automatic search to save all the stations found (ALL) or only those
with a strong signal (STRONG).
Full Scan (DAB): confirm with the SCAN / ENTER key to activate the automatic station search.
Manual Tune (DAB): Select this setting to manually search for DAB stations.
DRC (DAB): allows you to enable / disable the DRC function to improve the sound when listening in noisy environments. You can
set the DRC level to high (high), low (low) or Off (off).
Prune (DAB): allows you to delete from the list of stored stations all radios found but not available (poor signal).
System: allows you to access various accessory functions or system information.
Sleep: allows you to set an auto-off timer after which the device will go into mode standby automatically. It is possible to select
between 90, 60, 45, 30, 15 minutes. With "Off" the function is disabled.
Language: allows you to select the system language (English default).
Factory reset: allows you to restore all settings to the factory settings. Select Yes to restore.
SW version: version of the software installed.
BLUETOOTH OPERATION
1. Switch on the device and press and hold the MODE key (16) until the indication BT appears on the display.
2. DISCONNETTED will start flashing on the display and the system will automatically enter search.
3. Activate the Bluetooth functionality on the external device to be paired and make it visible.
4. Start the search for the devices, pair the "TT 1042 DAB" device, after pairing the message CONNECTED appears on the display.
5. Enter the password "0000" if necessary.
6. Once paired, the device will emit a confirmation tone.
7. Manage music playback from your device (eg smartphone or tablet).
8. Press and hold the/ key (8) for a few seconds to cancel the pairing.
8
TT 1042 DAB