Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 10 Friday, June 9, 2023 8:19 AM
10 INSTALLATION
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator
and the wall.
• Remember to allow enough room in front of the refrigerator to fully open the doors.
-
A
Depth without Handle
B
Width
C
Height to Top of Case
D
Height to Top of Hinge
E
Back Clearance
F
Depth without Door
G
Depth (Total with Door Open 90°)
Leveling
Leveling the Refrigerator
The refrigerator has two front leveling legs. Adjust
the legs to alter the tilt from front-to-back or side-
to side. If the refrigerator seems unsteady or the
doors do not close easily, adjust the refrigerator's
tilt, using the instructions below:
1
Turn the leveling leg to the left to raise that
side of the refrigerator or to the right to lower
it. It may take several turns of the leveling leg
to adjust the tilt of the refrigerator.
B
G
C
D
Dimensions/Clearances
E
F
A
28" (710 mm)
23 5/8" (600 mm)
63 5/8" (1616 mm)
64 5/8"(1640 mm)
24 5/8" (624 mm)
49 3/8" (1253 mm)
NOTE
• A flare nut wrench works best, but an open-end
wrench will suffice. Do not over-tighten.
LT11C2000*
2" (50 mm)
Publicidad
