en-us_main.book.book Page 14 Friday, June 9, 2023 8:19 AM
14 OPERATION
NOTE
• For optimal food preservation, change the default temperature one level at a time, waiting 24 hours
between changes to allow the temperature to stabilize.
Control Panel 2: Inside the Freezer
Turn the dial to select the desired temperature between Min and Max.
NOTE
• For optimal food preservation, change the default temperature one level at a time, waiting 24 hours
between changes to allow the temperature to stabilize.
Setting the Freezer Temperature
Level (1-5)
The temperature can be adjusted from level 1 to
level 5. Level 3 is recommended.
• You can lower the temperature by turning the
controller to the right and raise the temperature
by turning the controller to the left.
• Setting the controller at level 4-5 will maintain a
low temperature in the freezer. When the quick
freezing is finished (level 5), set the controller
back to the recommended level.
NOTE
• For optimal food preservation, change the
default temperature one level at a time, waiting
24 hours between changes to allow the
temperature to stabilize.
†
• Wait until 2 or 3 hours have passed after
plugging in the appliance before storing food in
the appliance.
• The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
other factors.
Water Dispenser
Before Using the Water Dispenser
CAUTION
• Do not hang on to or place heavy objects on the
refrigerator's dispenser.
• Keep children away from the dispenser. Children
may play with or damage the controls.
• Dispense and throw away 2.5 gallons of water
(flush for approximately 5 minutes) after
installation. Do not dispense the entire 2.5 gallon
amount continuously. Press and release the
dispenser pad for cycles of 30 seconds ON and
60 seconds OFF. This is also necessary if the
refrigerator has not been used for a long time.
• If water dispenses unexpectedly, turn off the
water supply and contact an LG Electronics
Customer Information Center.